ASB Trade › Fire alarm systems

Fire alarm systems

Also searched as: fire alarm system, addressable fire panel, fire alarm control panel, manual call point, Teletek fire panel

Addressable and conventional fire alarm equipment from Teletek and Sanjiang: Teletek addressable panels SIMPO (1 loop, 48 zones, up to 250 detectors per loop) and SIMPO X with a LAN network module, touchscreen iRIS4 for up to 4 loops and iRIS8 for up to 8 loops and 200 zones, conventional panels MAG 2P, 4P, 8P and MAG 8plus expandable to 16 zones, Sanjiang panels SEC1000, SEC3002 and SEC3002-2 (2 loops, up to 510 devices), SensoIRIS MIO22 and MOUT240 loop modules, MCP150 call points with built-in isolator and an IP67 version, SensoIRIS WSST strobe sounders to EN54-23, B124 detector bases, the LYNX LAN/4G communicator and panel repeaters. 76 items priced from 8 to 6719 GEL.

76 items · Sanjiang, Teletek

The panel is chosen by the size of the site: a shop or small office needs only a conventional MAG, where each zone covers a room or a floor, while in a multi-storey building an addressable panel shows exactly which detector or call point has triggered. On an addressable loop the isolators cut off only the damaged section after a short circuit, and the rest of the system keeps working. In noisy areas take a sounder with a strobe, outdoors an IP65 base and an IP67 call point. The LYNX module sends events to a monitoring station over SIA/CID. Equipment is sold by the piece or as kits at wholesale prices with next-day delivery in Tbilisi.

Frequently asked questions

How does an addressable fire panel differ from a conventional one?

On a conventional panel detectors are grouped into zones, and an alarm shows only the zone. On an addressable panel every detector or call point has its own address, so the panel shows the exact location. Addressable systems pay off on larger sites, conventional ones in small and simple buildings.

Why won't a sounder or detector work without a base?

Addressable detectors and sounders are mounted on a base, and the base connects to the loop cable. For example, SensoIRIS WS sounders need the B124 base, so the base is sold as a separate item and must be added when you order a detector.

Can Teletek and Sanjiang devices be mixed on one loop?

No. Each manufacturer has its own loop protocol (Teletek uses TTE), so detectors, call points and modules must match the brand of the panel. Pick the panel first and choose everything else to fit its series.